Grouting should be done after the tile adhesive has set and the tiles are firmly in place. This typically takes about 24-72 hours, depending on the type of adhesive used. It is important to wait until the adhesive has fully cured to ensure that the grout will adhere properly and provide a strong, durable finish. Additionally, grouting should be done when the weather conditions are suitable, as extreme temperatures or humidity can affect the grout's performance. **

Cement mortar with a mix ratio of 1:3 (1 part cement and 3 parts sand) is commonly used for tile grouting. This type of mortar is suitable for filling the gaps between tiles and providing a strong, durable bond. It is important to ensure that the mortar is mixed to the correct consistency and applied properly to achieve a smooth and even grout finish. **

Swamp and marsh areas tend to be foggier due to the high levels of moisture present in these environments. The water in swamps and marshes evaporates easily, creating a humid atmosphere that is conducive to fog formation. Additionally, the dense vegetation in these areas can trap moisture and prevent it from dissipating, further contributing to the foggy conditions. The combination of these factors makes swamp and marsh areas more prone to fog compared to other environments. **

Marsh and swamp areas are usually foggier because of the high levels of moisture present in these environments. The water in marshes and swamps evaporates during the day, increasing humidity levels in the air. When the temperature drops at night, the moisture in the air condenses, creating fog. Additionally, the dense vegetation in marshes and swamps can trap moisture and prevent it from evaporating, contributing to the foggy conditions in these areas. **

The drying time of the tile adhesive must be waited for before grouting because grouting too soon can disrupt the bond between the tiles and the adhesive. If grouting is done before the adhesive is fully dry, it can lead to the tiles shifting or becoming loose over time. Allowing the adhesive to fully dry ensures a strong and durable bond between the tiles and the substrate, resulting in a long-lasting and stable tile installation. **

If the mortar dries on the tile while grouting, you can try using a damp sponge to gently wipe away the dried mortar. Be careful not to apply too much pressure as you may scratch the tile surface. If the mortar is stubborn and does not come off easily, you can try using a commercial grout haze remover following the manufacturer's instructions. It's important to act quickly before the mortar fully sets to make the cleaning process easier. **

Grouting is typically not included in the fixed price after the installation of doors. Grouting is a separate process that involves filling the gaps between tiles or other materials, and it is not directly related to the installation of doors. Therefore, it is usually not included in the fixed price for door installation. Customers may need to arrange for grouting separately or inquire with the installation service provider for additional costs. **

It is recommended to wait at least 24 hours after the tiles have been laid before starting the grouting process. This allows the adhesive to fully set and the tiles to stabilize, ensuring a strong and durable bond. Waiting longer, such as 48 hours, may be necessary in humid or cold conditions to ensure the adhesive has fully cured. It is important to follow the specific instructions provided by the adhesive and grout manufacturers for the best results. **